IMT1723 - Schleifstein Vertical Spinning Lathe
STOCK NO : IMT1723
BRAND : SCHLEIFSTEIN
TECHNICAL DETAIL
Dish Head
Type
2:01
Ellipsoidal
10%
Tori
spherical
6%
Tori
spherical
Shallow Dished only / Baffle Diameter Range (mm) 1850-3500 1600-5000 1600-5000 1600-5800 1600-5800 Thickness Range (mm) Up to 20 mm Working Principle Hollow Spinning Working Process Cold Forming below 12°C Material Carbon Steel, Stainless Steel, Nickel & Copper Alloys and any formable material by cold spinning Video Part 1 https://youtu.be/yY9ZoBubdB0 Video Part 2 https://youtu.be/Zf9WRDu5Un0 The machine can be segregated into the 4 parts:
1. Hydraulic Piston Clamp
- Hydraulic Piston Clamp (top and bottom) to grab the dish
- The pistons were greased and inserted in the sleeves
- The valves were inspected and changed if found damaged
- The seals were changed
2. Dishing Unit
- The motor which move the dishing unit was checked whether it required rewinding
- The guide rails where check for wear and tear and none was found
- The guide rails were greased
- The spinning chuck motor was checked whether required re-winding
- The dies were checked for wear and tear and greased
3. Flanging Unit
- The motor which move the Flanging unit was checked whether it required rewinding
- The guide rails where check for wear and tear and none was found
- The guide rails were greased
- The hydraulic connections to the forming roll were checked
- The flanging dies were checked for wear and tear and greased
4. Auxiliary Unit – Manipulator
- The motors were checked whether requires rewinding
5. Auxiliary Unit – Hydraulic Pump Unit
- Piping which were damaged were replaced
- Faulty valves were replaced.
REACH US
If you have any question or inquiries, please don't hesitate to contact us on info@imt-mach.com / sales@imt-mach.com
